por15-M&T

M&T

ITEM
QTY
PRICES
GRINDING PASTE 1-1KG

(COURSE CUT GRINDING COMPOUND USED ON SISAL OR TAMPICO WHEELS)

euro 7.44
Add To Cart
power tank

(Power Tank Primer Metals Big 720 GRAMS has been specially designed to be used before the Power Tank internal regeneration kits of the tanks.)

euro 58.22
Add To Cart
3n1 black 750ml

(Rust protection paint non haz non water)

euro 23.55
Add To Cart
EASTWOOD CHASSIS BLACK

(Extreme Chassis Black is up to 3X more durable than Eastwood Original Chassis Black. This maximum durability epoxy formulation offers improved solvent, brake fluid, chip, fuel, scratch and corrosion resistance.)

euro 59.80
Add To Cart
6 x 1 thk finishing mop

(med soft finishing brass copper stainless steel)

euro 5.44
Add To Cart
BLUE FINISHING COMPOUND

(USED MOSTLY ON FINISHING WHEELS)

euro 6.80
Add To Cart
3n1 brantho 750ml red.

(Rust chasis paint)

euro 22.55
Add To Cart
6X6 PLY MAROON

(SIMI BRIGHT FINISH)

euro 6
Add To Cart
pink finishing compound

(Dry high shine finishing compound small bars)

euro 9.55
Add To Cart
blue finish

(Removes light scratches High gloss )

euro 11.55
Add To Cart
6 X 100 PLY FINISHING MOP

( no sewing med soft finishing mop)

euro 6.69
Add To Cart
10 x 90 ply finishing mop

(no sewing finishing mop)

euro 22.97
Add To Cart
8 x 120 ply finishing mop

(No sewing med soft finishing mop)

euro 12.90
Add To Cart
12 x 45mm thk fin mop

(12 inch finishing, will need 5hp to drive this wheel)

euro 45.86
Add To Cart
6x6 ply brown high cut lap mop

(best for stainless )

euro 10.96
Add To Cart
6x6 ply blue zir ox lap mop fine grit

(6X4 fine grit zir ox lap mop)

euro 4.40
Add To Cart
por15

(por15 grey 447)

euro 40
Add To Cart
High Temp Factory Manifold Grey Heat R

(POR-15 High Temp Manifold Grey Heat Resistant paint is guaranteed up to 650 deg C without peeling or flaking. Can even be used on turbochargers. POR15 high temperature coating is extremely resistant to the weather including salt and moisture. Two thin coats are recommended the first is air dried the second is cured at 150 deg C either in an oven or by the engine. Can be brushed or sprayed. Use POR 15 Solvent to thin. Lacquer thinner may be used for cleanup.)

euro 37.11
Add To Cart
POR15 Metal Prep Prep

(15 Prep and Ready (or Metal Ready) has been renamed to POR 15 Metal Prep. It is the ultimate in the relentless fight against rust. It not only dissolves away the rust it also etch primes the clean surface and leaves a Zinc Phosphate coating to prevent further rusting. This amazing liquid is non-toxic, non-flammable and non-corrosive. It ensures perfect paint adhesion and gives better welding conductivity. It can be brushed on, sprayed on or just immerse rusted parts to bring them up like new. Surfaces should be pre-treated withPOR15 Cleaner and Degreaser (Marine Clean) for greater effectiveness.POR-)

euro 18.55
Add To Cart
FROST CHASSIS BLACK

(ONE LITRE TINSOur Chassis Black Paint is oil resistant with 1 litre covering approx. 12 square metres. Apply to a clean dry surface with a primer if applying to new or bare metal. It can be brushed on or sprayed, if thinned. If you require it to be thinned, we would recommend white spirit.)

euro 29.50
Add To Cart
POR15 DEGREASE (Marine Clean) 3.78 litres

(POR-15 Cleaner and Degreaser (Marine Clean) cleans and degreases in one application without leaving residues, noxious fumes or flammable solvents.)

euro 33.90
Add To Cart
6x1 sec sisal taper bore

(high grade brushing wheeel for stainless or most hard metals)

euro 4
Add To Cart
6x2 section

(6x2 section brushing mop made from sisal fast cutting of stainless)

euro 5.90
Add To Cart
SISAL POLISHING MOP

(8X2 SECTION SISAL POLISHING MOPS, FAST CUTTING BETTER FINISHING THAN TRIZACT BELT FINISHING)

euro 9.55
Add To Cart
SISAL MOPS 8X1 TAPER BORE

(8X1 SECTION SISAL BRISHING MOP TAPER BORE, EXTRIME POLISHING EFFECT ON STAINLESS AND OTHER HARD METALS)

euro 5.90
Add To Cart
vht barral black

(VHT Satin Black Barrel Paint Aerosol for Motorcycle Engines (310ml))

euro 11.56
Add To Cart
VHT HIGH HEAT 947ML

(00000000000000000)

euro 58
Add To Cart
Weld Thru Zinc Galvanized Rich Primer 500ml

(Once corrosion starts between spot welded seams, it is difficult to stop it without removing and reassembling panels. You can ensure that it doesnt start though, by coating the panel edges with our Zinc Rich Primer prior to assembly and spot welding. The high zinc content of our coating prevents corrosion and ensures good electrical conductivity for welding. Low cost insurance against future rust. 500 ml aerosol. See more Frost Aerosols below.)

euro 11.88
Add To Cart
Echte branth 750ml

(Does not contain any fungicides, any biocides or pesticides Containing only raw materials which are approved according to the rules of the German Federal Health Office / Bundesgesundheitsamt for food processing machinery, food containers and food packaging When completely dry, EDEL FIRNIS is odourless, tasteless and free from environmental toxins Penetrates deeply into the wood Soaks the wood from the inside with resin and oil Thus resistance will be increased, recoating will be easier and better to be realised Suitable for all softwoods and hardwoods For paintings in the open as well as in buildings, e.g. for furniture For new paintings or renewal of coatings Especially suitable for dry wood)

euro 19.22
Add To Cart
6 x 1 sec polishing wheel

(6" X 1 SECcotton polishing wheel taper bore)

euro 4.80
Add To Cart
10X1 SISAL MOP

(10X1 SECTION SISAL MOP)

euro 11.55
Add To Cart
No Record(s) Available

M&T INDUSTRIAL MOPS. 

0872554493

info@mtm.ie

Copyright 2022 M&T INDUSTRIAL MOPS

M&T INDUSTRIAL MOPS

TEL 087-2554493

Copyright 2022 Company Name