por15 grey 447


ONE LITRE TINSOur Chassis Black Paint is oil resistant with 1 litre covering approx. 12 square metres. Apply to a clean dry surface with a primer if applying to new or bare metal. It can be brushed on or sprayed, if thinned. If you require it to be thinned, we would recommend white spirit.


Rust chasis paint


Rust protection paint non haz non water


Power Tank Primer Metals Big 720 GRAMS has been specially designed to be used before the Power Tank internal regeneration kits of the tanks.


Does not contain any fungicides, any biocides or pesticidesContaining only raw materials which are approved according to the rules of the German Federal Health Office / Bundesgesundheitsamt for food processing machinery, food containers and food packagingWhen completely dry, EDEL FIRNIS is odourless, tasteless and free from environmental toxinsPenetrates deeply into the woodSoaks the wood from the inside with resin and oilThus resistance will be increased, recoating will be easier and better to be realisedSuitable for all softwoods and hardwoodsFor paintings in the open as well as in buildings, e.g. for furnitureFor new paintings or renewal of coatingsEspecially suitable for dry wood


Extreme Chassis Black is up to 3X more durable than Eastwood Original Chassis Black. This maximum durability epoxy formulation offers improved solvent, brake fluid, chip, fuel, scratch and corrosion resistance.


POR-15 Cleaner and Degreaser (Marine Clean) cleans and degreases in one application without leaving residues, noxious fumes or flammable solvents.


Once corrosion starts between spot welded seams, it is difficult to stop it without removing and reassembling panels. You can ensure that it doesn’t start though, by coating the panel edges with our Zinc Rich Primer prior to assembly and spot welding.The high zinc content of our coating prevents corrosion and ensures good electrical conductivity for welding.Low cost insurance against future rust. 500 ml aerosol. See more Frost Aerosols below.


POR-15 High Temp Manifold Grey Heat Resistant paint is guaranteed up to 650 deg C without peeling or flaking. Can even be used on turbochargers.POR15 high temperature coating is extremely resistant to the weather including salt and moisture.Two thin coats are recommended the first is air dried the second is cured at 150 deg C either in an oven or by the engine.Can be brushed or sprayed. Use POR 15 Solvent to thin. Lacquer thinner may be used for cleanup.


15 Prep and Ready (or Metal Ready) has been renamed to POR 15 Metal Prep.It is the ultimate in the relentless fight against rust. It not only dissolves away the rust it also etch primes the clean surface and leaves a Zinc Phosphate coating to prevent further rusting.This amazing liquid is non-toxic, non-flammable and non-corrosive. It ensures perfect paint adhesion and gives better welding conductivity.It can be brushed on, sprayed on or just immerse rusted parts to bring them up like new. Surfaces should be pre-treated withPOR15 Cleaner and Degreaser (Marine Clean) for greater effectiveness.POR-


VHT Satin Black Barrel Paint Aerosol for Motorcycle Engines (310ml)







© Copyright 2022 M&T INDUSTRIAL MOPS


TEL 087-2554493

© Copyright 2022 Company Name